US Robotics USR803510 Guida Utente Scaricare il pdf (Pagina 14)

Selecting a Wireless Provider

For the minimum, out-of-the-box installation of the base unit, you have to connect the device to a

laptop and use the embedded web interface to select the appropriate wireless provider firmware.

To connect the gateway to a laptop and select a wireless provider:

1. Connect an Ethernet cable to the Ethernet port on the gateway front panel and a network port on a

laptop or computer.

2. In a web browser, go the URL: 192.168.1.1.

3. In the login screen, enter the default username admin and password admin.

4. Click the 3G Connection tab in the top menu bar.

5. Scroll down to the Radio firmware selection field for the wireless operator firmware options.

6. Select the appropriate wireless provider and click Save changes.

IMPORTANT: When using the USRobotics USR803510 (GSM/WCDMA only version), selecting the

wireless operator is not needed and you can immediately go to step 7 on this page.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 157 158

Nessun commento

US Robotics USR803510 Guida Utente Pagina 14